ITA Bottom Bracket for Shimano Road

CeramicSpeed ITA Bottom Bracket for Shimano Road

ITA for Shimano Road

Italian-threaded bottom bracket shells are typically found on Italian-brand road bikes. The shell measures 70mm wide and has a 35mm inner diameter.

This kit has all the pieces necessary to install 24mm diameter spindle cranks into an ITA shell. Those cranks come from Shimano, FSA, and others.

CeramicSpeed bearings pressed into threaded cups, then threaded into the frame. Those bearings comprise either Standard or Coated Bearings. Super round, super smooth CeramicSpeed balls rotate in hardened-steel races in both. The Coated version has a metallic coating laid onto the races, making them even harder and smoother, resulting in longer life and lower drag.

In The Box

• 2 threaded cups with bearings.
• 2 dust covers with built-in spacers.
• Spacer tube.
• 10mm syringe of All Round grease.
• Sticker sheet.

Technical Data

ITA bb’s, thanks to the popularity of Italian road bike design, still have a following. The drive-side cup needs to be properly secured, but once that’s done, the system is excellent. 24mm cranks work better when mated to our bearings.

To have your bike as efficient as possible, reduce mechanical drag. Bottom brackets have a measurable effect on speed. CS balls are 100% smoother and 15% harder than the ceramic competition. They run on smoother races, too. They reduce the drag of our Standard Bearing bb’s by 75% when compared to typical bottom brackets. The bearings last at least 3x longer than other bearings.

These bearings come packed with All Round Grease. If you want less drag and are riding in cleaner environs, install lowest drag TT and Track Grease. If you’re riding in wet conditions, more durable LongLife Grease can be put in.