Enve SES 5.6 DISC
Enve SES 5.6 DISC
Enve SES 5.6 DISC
Enve SES 5.6 DISC
Enve SES 5.6 DISC
Enve SES 5.6 DISC

Enve SES 5.6 DISC

Regular price $2,550.00
/

The ultimate disc brake specific, aerodynamic, and lightweight road race wheelset.

The SES 5.6 Disc is optimized aerodynamically and structurally for disc use. Road cyclists and triathletes on disc brake bikes will benefit from the SES 5.6 Disc’s reduced drag, lightweight design, and rim shape optimized for larger volume road tires.

  • ENVE's quick mid-depth wheelset for road racing and triathlons
  • SES carbon construction balances aerodynamics and stability
  • Unidirectional construction adds durability while dropping grams
  • Centerlock disc brakes improve braking in variable weather conditions
  • Healthy internal rim width is optimized for 25mm and wider tires
  • Tubeless compatibility lets you lower pressure to roll fast and smooth
  • Molded spoke holes boost strength to weight ratio
  • ENVE once again redefines the carbon aero wheelset

What's Included

Tubeless Kit (Clincher only):
-2x valve stems
-1x roll of tape (good for taping 3 wheels)
-2x Pressure Relief Valve Stem Nuts

Valve Extenders (45mm set)

Skewers 100/135mm (QR only)

Accessory Bag

Wheel Manual

Wheelbuild Card

SPECS

CLINCHER FRONT REAR WHEELSET
Rim Weight 449g 477g 926g
ENVE Alloy 700g 853g 1553g
i9 Torch Road CL 711g 856g 1567g
Chris King R45 CL 711g 856g 1567g

 

TUBULAR FRONT REAR WHEELSET
Rim Weight 386g 413g 798g
ENVE Alloy 637g 788g 1426g
i9 Torch Road CL 620g 787g 1408g
Chris King R45 CL 648g 791g 1440g

 

RIM SPECS FRONT REAR
Rim Depth 54mm 63mm
Internal Width 20mm 19mm
External Width 28.75mm 28mm
Hole Count 24 24
Effective Rim Diameter 548mm 532mm
Aero Optimized Tire Size 25c 25c


SPOKE INFORMATION* SPOKE CROSS FRONT LENGTH (NDS/DS) REAR LENGTH (NDS/DS)
ENVE Alloy 2X 266mm / 268mm 260mm / 258mm
DT240 CL QR, 12mm, 15mm/142mm 2X 264mm / 266mm 256mm / 254mm
Chris King R45 2X 260mm / 262mm 254mm / 252mm
Chris King R45 CL 2X 260mm / 260mm

254mm / 252mm

 

*This wheelset is built with Sapim CX Ray spokes. Those built before May 2018 may use a DT Swiss spoke equivalent. DT Swiss spoke heads are stamped "DT".

Tire Compatibility 

ENVE SES 2.2, 3.4, 5.6, 7.8, 3.4 Disc, 5.6 Disc, 7.8 Disc, SES Rear Disc Wheel – There are no limitations on tire compatibility with these wheel models. Your ENVE SES wheels may be set up and run with inner-tubes and non-tubeless tires or tubeless (TL) and tubeless ready (TLR) tires alike. We recommend the use of a Tubeless (TL) or Tubeless Ready (TLR) 700x25c tire set up tubeless to maximize aerodynamics, rolling resistance, crosswind stability, and your ride experience.

Non-Tubeless Setup (i.e. I want to run inner-tubes) – Each ENVE SES wheelset is delivered with one roll of RED, model specific, ENVE tested and approved tubeless rim tape. This tape should be installed regardless of whether you intend to run your wheels tubeless or not. Do not run cloth or plastic (including ENVE) non-tubeless compatible rim tape or strips. Plastic rim strips and cloth tapes are too thick, bridge the drop-center rim channel, and will make installation and removal of tires extremely difficult. Click here for our tubeless tape installation video.

Cotton and/or Natural Fiber Sidewall Tires  ENVE does NOT RECOMMEND the use of cotton or natural fiber sidewall non-tubeless tires with ENVE SES wheelsets for EVERYDAY USE. These tires are intended for high-performance racing applications only. If you choose to run these tires, please inspect your tires after each ride for cuts, tears, and any signs of abrasion and/or wear in the sidewall and at the location of the rim/tire interface. If any wear and/or damage is identified, replace before riding. Riders who choose to run tires with cotton or natural fiber sidewalls do so at their own risk.

You may also like